Water purification information

What is the difference between softened water and other water

Views : 69140
Update time : 2021-09-24 15:03:21
In daily life, we often see scale formation on the inner wall of the kettle after being used for a long time. What is the reason? It turns out that the water we take contains many inorganic salts, such as calcium and magnesium salts. These salts are invisible to the naked eye in water at room temperature. Once they are heated and boiled, a lot of calcium and magnesium salts will precipitate out as carbonates, and they will form scale when they cling to the kettle wall.

We usually use the index of "hardness" to express the content of calcium and magnesium ions in water. A hardness of 1 degree is equivalent to 10 mg of calcium oxide per liter of water. The water below 8 degrees is called soft water, the water above 17 degrees is called hard water, and the water between 8 to 17 degrees is called moderately hard water. Rain, snow, rivers, rivers, and lakes are all soft water, spring water, deep well water, and sea water are all hard water
Raw water refers to untreated water. In a broad sense, the water before entering the water treatment process is also called the raw water of the water treatment. For example, the water sent from the water source to the clarification tank is called raw water.
  
Softened water refers to water whose hardness (mainly refers to calcium and magnesium ions in water) has been removed or reduced to a certain extent. In the process of water softening, only the hardness decreases, while the total salt content does not change.

Desalting water refers to water that has been removed or reduced to a certain extent by salts (mainly strong electrolytes dissolved in water). The electrical conductivity is generally 1.0~10.0μS/cm, the resistivity (25℃)(0.1~1.0)×106Ω˙cm, and the salt content is 1~5mg/L.

Pure water refers to the water that has been removed or reduced to a certain extent by the strong and weak electrolytes (such as SiO2, CO2, etc.) in the water. The electrical conductivity is generally 1.0~0.1μS/cm, and the electrical conductivity (1.01.0~10.0)×106Ω˙cm. The salt content is <1mg/L.

Ultrapure water refers to the water in which the conductive medium in the water is almost completely removed, and the non-dissociated gases, colloids, and organic substances (including bacteria, etc.) are also removed to a very low level. Its electrical conductivity is generally 0.1~0.055μS/cm, resistivity (25℃) ﹥10×106Ω˙cm, salt content ﹤0.1mg/L. Ideal pure water (theoretically) has a conductivity of 0.05μS/cm and a resistivity (25°C) of 18.3×106Ω˙cm.
Related News
Read More >>
How much do you know about ultrafiltration technology and ultrafiltration membranes?? Ultrafiltration Knowledge Points Collection, you deserve it! How much do you know about ultrafiltration technology and ultrafiltration membranes?? Ultrafiltration Knowledge Points Collection, you deserve it!
Aug .23.2024
How much do you know about ultrafiltration technology and ultrafiltration membranes? Ultrafiltration membrane technology is an important technology for water treatment in environmental protection projects. It has extremely broad application prospects in urban sewage treatment, various industrial wastewater treatment, and recovery of useful substances. At present, one of the research directions of ultrafiltration membrane technology is to invent more efficient ultrafiltration devices, and the other is to combine it with other water treatment technologies based on the characteristics of the incoming water quality to improve the quality of the effluent.
Do you know the seven major phenomena of reverse osmosis membranes? Do you know the seven major phenomena of reverse osmosis membranes?
Aug .22.2024
Reverse osmosis is a water treatment process that developed rapidly in the 1960s. At present, it has been used in urban water, boiler feed water, power plant boiler feed water, industrial wastewater, seawater desalination, and solute separation in various solutions. The working principle of the reverse osmosis membrane is to use pressure as a driving force to separate the solvent from the solution. It has good applications in food, electronics, medicine, printing and dyeing and other industries. In the long-term use process, some problems are inevitable. How are some of the "phenomena" that appear in the application of reverse osmosis membranes formed?
When buying a water purifier for the first time, you should know these things! When buying a water purifier for the first time, you should know these things!
Aug .21.2024
Water purifiers are becoming more and more common nowadays. Many people want to buy water purifiers but don’t know where to start. If they buy without any advice, they will be easily overwhelmed by a lot of technical terms used by the salesperson. Today, I will tell you what these terms mean and how to “pick” the RO reverse osmosis water purifier that suits you best! Let’s read on.